Chief Engineer Officer and Second Engineer Officer
Function 3: Maintenance and Repair at the Management Level
Chief Engineer Officer and Second Engineer Officer
Function 3: Maintenance and Repair at the Management Level
INDEX
Part B3: Course Outline 114
Part C3: Detailed Teaching Syllabus 115
Introduction
Explanation of information contained in the syllabus tables
3.1 Manage safe and effective maintenance and repair procedures
3.2 Detect and identify the cause of machinery malfunctions and correct faults - Practical knowledge
3.3 Ensure safe working practices - Practical knowledge
Part D3: Instructor Manual 122
PART B3: COURSE OUTLINE
Knowledge, understanding and proficiency
3.1 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES
3.1.1 MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE
.1 Planned maintenance system as per ISM code.
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES
PRACTICAL KNOWLEDGE
.1 Manage safe and effective maintenance and repair procedures relevant to 3.1.1
3.1.3 PLANNING MAINTENANCE, INCLUDING STATUTORY AND CLASS VERIFICATIONS
PRACTICAL KNOWLEDGE
.1 Planning maintenance, including statutory and class verifications relevant to 3.1.1
3.1.4 PLANNING REPAIRS
PRACTICAL KNOWLEDGE
.1 Planning repairs relevant to 3.1.1
3.2 DETECT AND IDENTIFY THE CAUSE OF MACHINERY MALFUNCTIONS AND CORRECT FAULTS PRACTICAL KNOWLEDGE
3.2.1 DETECTION OF MACHINERY MALFUNCTIONS, LOCATION OF FAULTS AND ACTION TO PREVENT DAMAGE
.1 Unplanned maintenance
3.2.2 INSPECTION AND ADJUSTMENT OF EQUIPMENT
.1 Inspection and adjustment of equipment relevant to 3.1.1
3.2.3 NON-DESTRUCTIVE EXAMINATION
.1 Different types of non-destructive examination
3.3 ENSURE SAFE WORKING PRACTICES PRACTICAL KNOWLEDGE
3.3.1 SAFE WORKING PRACTICES
.1 Risk assessment
.2 Safety officials
.3 Personal protective equipment
.4 Work equipment
.5 Safety induction
.6 Fire precautions
.7 Emergency procedures
.8 Safe movement
.9 Safe system of works
.10 Entering enclosed or confined spaces
.11 Permit to work systems
.12 Manual handling
.13 Use of work equipment
.14 Lifting plants
.15 Maintenance of machineries
.16 Hot work
.17 Painting
.18 Hazardous substances
.19 Noise and vibrations
Total for Function 3 : Maintenance and Repair at the Management Level 66 hours
PART C3: DETAILED TEACHING SYLLABUS
COMPETENCE 3.1
Manage safe and effective maintenance and Repair procedures
TRAINING OUTCOMES:
Demonstrates a knowledge and understanding of: STCW Code
3.1.1 MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES PRACTICAL KNOWLEDGE
3.1.3 PLANNING MAINTENANCE, INCLUDING STATUTORY AND CLASS VERIFICATIONS PRACTICAL KNOWLEDGE
3.1.4 PLANNING REPAIRS PRACTICAL KNOWLEDGE
COMPETENCE 3.1
Manage safe and effective maintenance and Repair procedures
3.1.1 MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE R1, R4
Required Performance:
1.1 Discusses the preparation and use of planned maintenance systems (PMS) as per ISM code. (5 hours)
o Objective of PMS
o Equipment covered under PMS
o Critical equipment
o Preparation of vessel specific PMS
o Maintenance schedule and job procedures
o Updating of maintenance schedule
o Spare parts inventory
o Recording of defects
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURE
PRACTICAL KNOWLEDGE
Required Performance:
2.1 Manage safe and effective maintenance and repair procedures relevant to 3.1.1 (10 hours)
o Discusses the preparation and practice of Dry docking, In-water survey and lay up
. Drydock repair file
. Preparation of drydock repair specification
. Drydocking and in-water survey
. Initial and final drydock inspection.
. Supporting the vessel in drydock.
. Preparations for drydocking and undocking.
. Survey work and maintenance during drydock.
. Typical arrangements for the supply of electrical power, fresh water and sanitation facilities while the vessel is in drydock.
. Special arrangements during drydock for the prevention of fires and explosions.
. The management of oil and water tanks during drydock. Testing of tanks by hydrostatic and pneumatic means.
. Describe the preparations, inspections, records, planning, maintenance and events which occur with dry docking and in-water hull surveys.
. Lay ups. Plan aspects of dry docking, in water hull cleaning, and vessel layup/reactivation.
3.1.3 PLANNING MAINTENANCE, INCLUDING STATUTORY AND CLASS VERIFICATIONS PRACTICAL KNOWLEDGE
Required Performance:
3.1 Planning maintenance, including statutory and class verifications relevant to 3.1.1 (5 hours)
o Discusses procedures for planned maintenance that requires dismantling and
inspection/calibrations
. Dismantled in sequential order as per manufacturer#39;s instruction manual
. Cleaned prior to inspection
. Inspected and/or calibrated as appropriate
. Items are assessed to determine whether can be reused or need to be replaced/repaired/reconditioned
. Above information recorded in maintenance record of equipment/machines
<p
全文共30428字,剩余内容已隐藏,支付完成后下载完整资料</p
Chief Engineer Officer and Second Engineer Officer
Function 3: Maintenance and Repair at the Management Level
Chief Engineer Officer and Second Engineer Officer
Function 3: Maintenance and Repair at the Management Level
INDEX
Part B3: Course Outline 114
Part C3: Detailed Teaching Syllabus 115
Introduction
Explanation of information contained in the syllabus tables
3.1 Manage safe and effective maintenance and repair procedures
3.2 Detect and identify the cause of machinery malfunctions and correct faults - Practical knowledge
3.3 Ensure safe working practices - Practical knowledge
Part D3: Instructor Manual 122
PART B3: COURSE OUTLINE
Knowledge, understanding and proficiency
3.1 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES
3.1.1MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE
.1 Planned maintenance system as per ISM code.
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES
PRACTICAL KNOWLEDGE
轮机长和大管轮
功能3:管理级维护和修理
轮机长和大管轮
功能3:管理级维护和修理
目录
B3部分:课程概要114
C3部分:教学大纲细则115
介绍
大纲表格里的信息说明
3.1安全和有效维修程序的管理
3.2检测和识别机械故障原因并消除故障 - 实用知识
3.3确保实行安全工作- 实用知识
D3部分:教员手册122
B3部分:课程大纲
知识,理解和熟练
3.1安全和有效维修程序的管理
3.1.1轮机工程实践
理论知识
.1依据ISM规则的计划保养体系。
3.1.2安全和有效维修程序的管理
实用知识
.1 Manage safe and effective maintenance and repair procedures relevant to 3.1.1
3.1.3 PLANNING MAINTENANCE, INCLUDING STATUTORY AND CLASS VERIFICATIONS
PRACTICAL KNOWLEDGE
.1 Planning maintenance, including statutory and class verifications relevant to 3.1.1
3.1.4 PLANNING REPAIRS
PRACTICAL KNOWLEDGE
.1 Planning repairs relevant to 3.1.1
3.2 DETECT AND IDENTIFY THE CAUSE OF MACHINERY MALFUNCTIONS AND CORRECT FAULTS
PRACTICAL KNOWLEDGE
3.2.1 DETECTION OF MACHINERY MALFUNCTIONS, LOCATION OF FAULTS AND ACTION TO PREVENT DAMAGE
.1 Unplanned maintenance
3.2.2 INSPECTION AND ADJUSTMENT OF EQUIPMENT
.1 Inspection and adjustment of equipment relevant to 3.1.1
3.2.3 NON-DESTRUCTIVE EXAMINATION
.1 Different types of non-destructive examination
3.3 ENSURE SAFE WORKING PRACTICES PRACTICAL KNOWLEDGE
3.3.1 SAFE WORKING PRACTICES
.1 Risk assessment
.2 Safety officials
.3 Personal protective equipment
.4 Work equipment
.5 Safety induction
.6 Fire precautions
.7 Emergency procedures
.1 与3.1.1相关的安全和有效维修程序的管理
3.1.3包括法定和船级检验的计划保养
实践知识
.1 与3.1.1相关的计划修理
3.1.4计划修理
实用知识
.1包括与3.1.1相关的计划修理
3.2检测和识别机器故障的原因并消除故障
实用知识
3.2.1机械故障检测和防止其受损的措施
.1视情维修
3.2.2设备的检查和调整
.1与3.1.1相关的设备的检查和调整
3.2.3无损检测
.1不同类型的无损检测
3.3确保实行安全工作
3.3.1实行安全工作
.1风险评估
.2安全官员
.3个人防护设备
.4工作设备
.5安全归纳
.6防火措施
.7应急程序
.8 Safe movement
.9 Safe system of works
.10 Entering enclosed or confined spaces
.11 Permit to work systems
.12 Manual handling
.13 Use of work equipment
.14 Lifting plants
.15 Maintenance of machineries
.16 Hot work
.17 Painting
.18 Hazardous substances
.19 Noise and vibrations
Total for Function 3 : Maintenance and Repair at the Management Level 66 hours
PART C3: DETAILED TEACHING SYLLABUS
COMPETENCE 3.1
Manage safe and effective maintenance and Repair procedures
TRAINING OUTCOMES:
Demonstrates a knowledge and understanding of: STCW Code
3.1.1 MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURES PRACTICAL KNOWLEDGE
3.1.3 PLANNING MAINTENANCE, INCLUDING STATUTORY AND CLASS VERIFICATIONS PRACTICAL KNOWLEDGE
3.1.4 PLANNING REPAIRS PRACTICAL KNOWLEDGE
COMPETENCE 3.1
Manage safe and effective maintenance and Repair procedures
.8 安全活动
.9 安全工作制度
.10 进入密闭或受限制空间
.11 工作许可证制度
.12 人工处理
.13工作设备的使用
.14 提升设备
.15 机械设备的维护
.16 热工作业
.17 油漆作业
.18 有害物质
.19 噪声和振动
功能 3 : 管理级维护和修理的课时总数 66小时
C3部分:教学大纲细则
适任3.1
安全和有效维修程序的管理
培训效果:
讲授下列内容知识与理解:STCW规则
3.1.1轮机工程实践
理论知识
3.1.2安全和有效维修程序的管理
实用知识
3.1.3包括法定和船级检验的计划保养
实用知识
3.1.4计划修理
实用知识
适任3.1
安全和有效维修程序的管理
3.1.1 MARINE ENGINEERING PRACTICE THEORETICAL KNOWLEDGE R1, R4
Required Performance:
1.1 Discusses the preparation and use of planned maintenance systems (PMS) as per ISM code. (5 hours)
o Objective of PMS
o Equipment covered under PMS
o Critical equipment
o Preparation of vessel specific PMS
o Maintenance schedule and job procedures
o Updating of maintenance schedule
o Spare parts inventory
o Recording of defects
3.1.2 MANAGE SAFE AND EFFECTIVE MAINTENANCE AND REPAIR PROCEDURE
PRACTICAL KNOWLEDGE
Required Performance:
2.1 Manage safe and effective maintenance and repair procedures relevant to 3.1.1 (10 hours)
o Discusses the preparation and practice of Dry docking, In-water survey and lay up
. Drydock repair file
. Preparation of drydock repair specification
. Drydocking and in-water survey
. Initial and final drydock inspection.
. Supporting the ves
全文共39326字,剩余内容已隐藏,支付完成后下载完整资料
资料编号:[11493],资料为PDF文档或Word文档,PDF文档可免费转换为Word
以上是毕业论文外文翻译,课题毕业论文、任务书、文献综述、开题报告、程序设计、图纸设计等资料可联系客服协助查找。